Mariner 3 cylinder 50 HP stator problem
Have open 16 amp stator in 1988 Mariner 2 cycle 3 cylinder 50 HP outboard. Ordered replacement stator based on SN OB273351. The failed stator part number is 398-832075 A3 with green/white and white/green stator leads. Stator leads do not connect directly to the control module but instead connect to same color leads that then connect to what appears to be a double rectifer with one blue output lead that connects to the control module. Stator received is 398-832075 A4 with red and green stator leads. Are the two stators compatable and if so how must the leads be connected? Is retiming motor necessary following replacement?
Last edited by Roger; 07-22-2010 at 02:39 PM.
Reason: better heading info
|
Linear Mode
