serial number help

xllxmrjohnxllx · #1 (**permalink**) 12-09-2009, 11:10 PM

I have a 150 black max out board and I know like to know where the serial number is at on the motor ? I have looked all over it and I found some numbers on the driver side by the head at the bottom the numbers are 8588346 then 0-3 and square with a 2 in it ? Is this the write number ? I want to know what year and if it's really a 150 the guy I got from said it was a 175 with a 150 hood on it ? Any help will be appreciated sorry for a long post thanks everyone

boats.net · #2 (**permalink**) 12-10-2009, 09:01 PM

No that number just comes up as invalid number.

xllxmrjohnxllx · #3 (**permalink**) 12-12-2009, 01:16 PM

Where would the serial number be at on the motor ?
I found some new numbers hope this is right 0 1433-3708-01

boats.net · #4 (**permalink**) 12-14-2009, 03:56 PM

Some of the older models had the serial number on a welch plug in block but the newer ones don't have it on engine block no where.

xllxmrjohnxllx · #5 (**permalink**) 12-16-2009, 03:08 PM

I found some more numbers maybe this is right 0 1433-3708-01????

Faztbullet · #6 (**permalink**) 12-17-2009, 01:54 AM

Look at the posted picture and this will tell you the date produced. Also on the crankcase have right above the throttle arm bolt you should see a number stamped into flange ,this will be the horsepower but not all blocks stamped. Also there should be a welch plug on top of block with serial number. Also the model/series number of carb can tell horsepower...
2= 200
7= 175
5= 150
3= 135

xllxmrjohnxllx · #7 (**permalink**) 12-18-2009, 04:01 AM

It has 3 2 barrel carbs on it thanks everyone for the tips and help I really appreciate it ! Maybe 1 day i'll know enough to help others lol

Faztbullet · #8 (**permalink**) 12-18-2009, 10:49 PM

Post the date code (example: 09-27-89) and can get you the series carb #'s it should have.

xllxmrjohnxllx · #9 (**permalink**) 12-19-2009, 09:50 PM

Where do I find the date on the motor ? I found some numbers by where the power tilt and trim hook to the motor and the numbers are O or 0 then 1433-3708-01 i'm not sure about if they are the right ones

Faztbullet · #10 (**permalink**) 12-23-2009, 10:10 PM

Look at the earlier post with the powerhead picture, circled in red is the area of date code and serial # area.