Need Help - Convert 2002 25hp Tiller to Remote Controlls

Gramps · #1 (**permalink**) 09-14-2009, 04:49 PM

Hey everybody I need some help converting my tiller motor to a remote control unit. My motor is a 2002 25hp 2strk Short Shaft E-Start model # 1025301ZD. I need the control box, steering link, etc. all items required.

I have seen the Remote Control Attachment Kit and Attachment Kit Steering Link for another user, what else is there? Thanks in advance for your help!

-Scott

boats.net · #2 (**permalink**) 09-15-2009, 02:35 AM

826633A 1 Remote conversion kit
41323A 2 Steering link arm kit
I'm out of office right now and don't remember control box number. You can call Boats.net at 877-408-1499 for help on controls.

Gramps · #3 (**permalink**) 01-18-2010, 08:38 PM

Thanks for the help but I have a few more questions! I spoke with a gentleman on the phone this evening that helped me find the control box, 881170A3 which we believe is correct. But, how do I know what pin count connector I require? The motor is none tilt & trim.

Also, aside from throttle/shift cables, what other items will I need?

Thanks again.

-S

boats.net · #4 (**permalink**) 01-19-2010, 08:27 AM

Yes that is the correct control box(8 pin). You would also need 2 control cables, 850716A__(replace __ with length cable needed) and the conversion kits listed on other posts.

Gramps · #5 (**permalink**) 01-21-2010, 02:33 PM

I ordered the parts on Tuesday night. Thanks for all of your help!