Mercury Parts       Mercury Marine Parts
 
Mercury Marine Parts Forum Mercury Outboard Parts Discussion Forum Mercury Outboard Parts Boat Parts Mercury Outboard Parts Forum Outboard Motor Parts Contact Us
Mercury Parts Mercury
  #1 (permalink)  
Old 05-14-2011, 01:31 AM
Junior Member
 
Join Date: Apr 2011
Posts: 2
Default 2007 Mercury 25 hp 4 Stroke EFI Electric Start Tiller Questions

I would like to share my experience with this make and year.
My 25hp EFI trolled beautifully she would get down to about 1.5 mph. I could not ask for a better motor to continiously limited out on Walleye's day in and night out!
Well that was until last year Open Day! As I was heading out on Lake Erie just before dark that night. Just got outside of the breakwall heading toward Hamburg...boom my girl just died. Cranked her back up and she would run for 20 second and quit. After 5 trys and same old same old. I check to see if my hose was kinked, nothing. I cranked her back up and heading back to the launch extremely diappointed. She allowed me to crawl back at 2 mph and took me over 3 hrs. Dropped her off at the my perferred tech and waited for his call. 3 days later and he thinking the head is warped. Next day he calls and tells me bearing failure in lower unit. Opened her up and he said it looked like he just cleaned off his drill press and had a dust pan full of metal shaving. To make this long story longer.
Merc replaced the LU at no charge under warranty.
But she is not the same. I can't get it below 2.5 now and my shifting sucks!
I took her back and the tech set to factory specs and it still idles high and the shifting clunks in and out of gear. I am very PO'd.
I talk to factory rep and stated what boat.net replied that the RPM's are to high.
My question is did my tech set it to 820-880 in neutral and not in gear, WOULD THAT MAKE A DIFFERENCE?
Q #2 She run great wide open from A to B. but when I start trolling she stalls,I'll get her going again and 15 minutes later she stalls and she fine until. I repeat the A to B.
Q#3 My shifting is worst off than it was and when I take my hand of the shifter she run at the same speed,as if the friction is torqued down and it is not.
I had read their is a secret screw adjustment on the throttle body that is hidden and according to other has made there shifting a lot smoother. Is there any truth to this and where would I locate it!

Before the lower unit went, the motor ran like like a CHAMP...after it performs like a chump.
Any input would be greatly appreciated.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


All times are GMT -4. The time now is 07:49 AM.

Outboard Parts

Other Forums
Yamaha Parts
Suzuki Parts
Evinrude Parts
Johnson Parts
Honda Parts

Copyright © 2000 - 2012, Outdoor Network LLC