Hi, I new to this forum, I just came across it via internet search. I am in the process of bypassing my oil injector pump. I read about several different ways this is done. I removed the pump and removed the plunger out of the pump itself, is this sufficient or does the shaft in the motor need to be removed. And if so, does the shaft just pull out? Or would it be best to remove the whole pump and put a delete plate? If so, do they make one for this, or do I have to make one?

Thanks in advance,

Best to remove pump and pump drive shaft and install a block off.

__________________
Regards
Boats.net
Mercury Outboard Parts
MerCruiser Parts
Force Outboard Parts
Mariner Outboard Parts

What about the hose jump from the fuel pump to the block? I took out the tee where the oil injected, so I now have an inlet, an outlet, an another on the front of the fuel pump going to the block. does this need to be removed and plugged up?